Beaded Skeleton KeyChain Pattern - Fun Beaded Halloween Key Rings

Materials Needed:

Note: Links to product pages will open in a separate window.

You will need one connector such as a
Lanyard hook,
or any type of
Key Ring.

Cord:
You will need about
2 yards of cord for your skeleton.
There are lots of different types of cords you can use. We prefer a cord that is 1mm to 2mm thick because it helps your skeleton keychain keep it's shape better. Alternatively, you could use a thinner cord and weave a little wire or a pipe cleaner into your keychain to help it keep it's shape that way. Either way works just fine but you can experiment with it to see which method you prefer.

One good choice is
Monofilament Cord
or
2mm metallic cording. Other great choices would be jute or hemp cord, leather necklace cord, rattail cord, shoelaces, ribbon, paracord, or a strong jewelry cord like tigertail.

For ours, we used a 1mm white cotton jute cord.

Helpful Hint: If your cord end frays easily try dipping it into a little melted wax and smoothing it out with your fingers. This will help prevent fraying and also create a stiffer end for threading into your beads.

Beads needed:
 97 - Glow-in-the-Dark White Pony Beads

 9 - Black Iridescent Pony Beads

Note: these are the colors we used. Use these colors or make your skeleton a solid color, or whatever color or colors are perfect for you.

Other Things Needed:


Glue
 (We used "super glue")

Optional: For a stiffer cow you can include a little wire or a pipe cleaner with your cord to help keep it's shape
 Beading Wire
OR
 Pipe Cleaners

Instructions

1. Find the half way point of the cord or wire you are using and attach it onto the keyring using a lark's head knot (shown in photo).

2. Begin threading the beads onto the cord following the pattern below. You can click on the image at the bottom of the page for a larger, better resolution photo.

3. After finishing the pattern tie a double knot or surgeon's knot in the cords at the bottom and apply glue to secure.

(Optional) Weave your wire or pipe cleaner through one of the widest rows in the middle of your beaded cow keychain to make it stiffer and hold it's shape. Three or four beads can be strung onto the end of the cord as a finishing touch.

The illustration below shows you how each cord side is threaded into the beads.

Would you like to make other Halloween themed beaded critters? How about some cool Beaded Black Cat OR Beaded Ghosts OR Beaded Jack O'Lantern OR Beaded Bat OR Beaded Spider

Make a bunch of them and string them up onto Halloween garland!

Follow the same pattern using seed beads or E beads in place of pony beads to create smaller characters and create a great pair of earrings or a necklace pendant.